Job search
Interview Scheduling Across Time Zones: Check the Link, Calendar, and Recruiter Message
Reconcile the recruiter message, meeting invitation, candidate portal, and local calendar time before joining a job interview.
A job interview can appear at different local times on a calendar, and a recruiter may update the meeting link in a separate message. Before joining, compare the latest recruiter instruction with the calendar invitation and the event shown on your device. Confirm the date, time zone, meeting link, and any change or cancellation; do not rely only on the time your calendar displays.
When an interview spans time zones, a one-hour difference can come from a daylight-saving transition rather than a recruiter mistake. Keep the original date, time, and named zone from the invitation, then use your calendar to check the local conversion. If the three sources disagree, ask the recruiter to confirm the intended time and current link in writing before you reschedule or join.

Browse recent roles on LandOffer.ai and save each interview invitation with the role and recruiter message.
Start with the original interview invitation
Find the calendar invitation or scheduling confirmation sent by the recruiter, employer, or approved scheduling system. Record the role, interviewer or recruiting contact, full date, stated time, time zone, meeting platform, and link. Check whether the invite says “updated,” “rescheduled,” or “canceled,” and whether it identifies the appointment as a phone, video, or in-person meeting.
A recruiter’s first email may offer a time, while a later calendar invite supplies the final appointment. Or the invite may be created first and then changed in a message. Look for the newest explicit instruction from a verified recruiting contact. A new time in a message does not guarantee that the old calendar event was canceled; an updated event does not prove that a separate message’s replacement link is valid. Check both and ask when they conflict.
Do not assume that the time zone is the one used by the company headquarters, the recruiter, your computer, or the location you will travel to. “10:00 a.m. Eastern” refers to the interviewer’s stated zone if the message says so, even if your device is set to Pacific time. If the note only says “10:00” or uses an ambiguous abbreviation, ask which location or time zone the recruiter means.
Keep the original zone and verify the local conversion
Use the full date with the named zone. Daylight-saving rules can make the difference between two places change during certain weeks of the year. In 2026, for example, U.S. daylight saving time began on March 8, while the United Kingdom’s clocks changed on March 29. On March 18, 2026, a fictional 10:00 a.m. interview in New York (Eastern Daylight Time) corresponded to 2:00 p.m. in London (Greenwich Mean Time), a four-hour difference. During other parts of the year, the gap may be five hours.
This example is a planning aid, not a substitute for the time in your own invitation. The National Institute of Standards and Technology publishes the U.S. daylight-saving schedule, and GOV.UK lists the UK clock-change dates. If the date is near a clock change, use the event’s full date and region-specific time zone in an up-to-date calendar, then confirm with the recruiter if the invitation does not name a zone.
Google Calendar says events appear in the local time zone of each invitee and are converted through UTC. Microsoft Outlook likewise displays events in the viewer’s time zone and tracks daylight-saving changes. Those conversions are useful checks, but a calendar display cannot tell you whether the organizer intended a different time or whether a later message changed the appointment. Read the original zone and date in the invite, then compare the converted display. For how to set a time zone for an event in those products, see Google Calendar’s time-zone guide and Microsoft Outlook’s time-zone instructions.
Avoid relying on a short abbreviation by itself. “ET” often communicates Eastern Time broadly, while “EST” and “EDT” name different seasonal offsets; people also use these labels imprecisely in casual messages. “CST” can refer to more than one region. If a message gives only an abbreviation, preserve it as written and ask the recruiter to confirm the city or named time zone. Do not silently replace an abbreviation with a fixed UTC offset, because that offset may no longer apply on the interview date.
Also check whether the conversion changes the calendar day. A late-evening appointment in one location can appear the following morning for an interviewer elsewhere. For example, on March 18, 2026, 9:30 p.m. in New York was 1:30 a.m. on March 19 in London. The date is as important as the clock time. When you reply, include both the original date and your local date so the recruiter can see if the two calendar entries appear to differ.
If you will travel before the interview, note the destination’s local time and the time zone in your device settings. Your calendar may change the displayed hour when your device changes zones, but the event is still tied to a particular scheduled moment. Do not manually move the appointment just because the display changed. Confirm the appointment date, original zone, and destination-local time before updating your travel plans.
Compare the recruiter message, calendar event, and portal
Use a small reconciliation checklist:
| Source | What to verify |
|---|---|
| Latest recruiter message | Current time, stated time zone, meeting format, and any replacement link |
| Calendar invitation | Date, start time, event time zone, meeting platform, organizer, and update/cancellation status |
| Candidate portal or scheduling page | Whether the appointment is confirmed, changed, canceled, or awaiting your selection |
If all three agree on the date and moment, accept or keep the calendar event as directed. If the recruiter offers a new slot, check whether a replacement calendar invite arrives and whether the earlier event is marked canceled or updated. If the new message changes only the link, keep the original time and ask if that is intended. If the portal still shows “pending,” ask whether you must confirm the slot there.
A calendar event can also be automatically created from an email or scheduling service. Check the organizer and the original message instead of trusting a duplicate entry or a manually copied event. If two calendar entries show the same interview, determine which one came from the employer’s current invitation. Remove or decline a duplicate only after you know the active event; otherwise you could accidentally cancel the correct one.
Treat the meeting link as its own check. Confirm that the link opens the expected video platform and that the event or recruiter message associates it with the right role and time. If a replacement link arrives from an unfamiliar sender, go back to the employer’s verified email thread or candidate portal before entering information. Do not forward a private meeting link publicly or post it in a forum.

Ask the recruiter when the details do not line up
Send a concise question that preserves the details you are comparing. Include the date and time as written, the time shown on your calendar, the zone your device currently uses if relevant, and whether the link differs. Ask the recruiter to confirm the intended appointment time and which link to use. This gives them enough context to correct the invite or clarify a conversion.
For example:
Subject: Confirming interview time and link — [role]
Hi [Recruiter],
I’m confirming the interview for [role/requisition] on [date]. The invitation lists [time and named time zone], while my calendar displays [local date and time] in [your time zone]. I also received a later message with a different meeting link.
Could you confirm the intended start time and time zone, whether the later link replaces the one in the calendar invite, and whether an updated invitation will be sent? I’ll use the confirmed details.
Thank you, [Name]
If the time appears to differ by exactly an hour, do not tell the recruiter their invite is wrong before checking the date and locations involved. Explain what each source says and ask which one governs. If you receive only “the invite is correct,” but still cannot tell whether the start time is yours or the recruiter’s local time, ask them to spell out the named zone or city.
If the recruiter confirms a new date or time, ask for a corresponding calendar update when practical. Once it arrives, check that it moved the existing event rather than creating a second one, and verify the link again. If the interview is scheduled through a third-party booking page, save its confirmation and make sure the candidate portal reflects the same appointment.
When there are no slots or the link will not open
A scheduling link and an interview meeting link do different jobs. The first lets you select a time; the second joins an already scheduled appointment. If a booking page shows no available times, a slot disappears, or the scheduling window has elapsed, contact the recruiter or hiring company and ask what availability remains. Do not repeatedly book nearby times to test the interface.
Some platforms let employers configure which time slots and rescheduling options candidates see. HireVue’s candidate help explains that scheduling depends on the hiring company’s configuration and directs candidates to the hiring company when no slots are available or the scheduled time has passed. That is why the recruiter, rather than a time-zone conversion, is the right contact for new availability.
If the interview is already scheduled but the meeting link is broken, preserve the invite and contact the recruiter using the verified message thread. Include the platform name and a brief description of the error, but do not include unrelated personal information. If there is a platform support route, you may use it for a product access problem; the employer still needs to confirm the interview’s timing and next step.
If you discover a time conflict shortly before the appointment, ask for a reschedule as soon as possible and state the date, zone, and affected calendar event. A calendar app’s “propose a new time” feature may be available, but the organizer must confirm the change. Keep the existing event until the recruiter’s replacement or cancellation is clear.
Use one confirmed record on interview day
Before the appointment, open the latest verified recruiter message and the current calendar event. Recheck the date, start time, time zone, and link. If you changed devices, traveled, or updated your calendar settings, confirm that the local display still corresponds to the invite’s original time. Join using the latest confirmed link, not an old link copied into a personal note.
Save one record with the role and requisition, recruiter thread, original time and zone, local conversion, confirmed link, and any update. If a confirmation is still missing, send one clear follow-up instead of creating another booking or changing the time yourself. Browse recent roles on LandOffer.ai when you are ready to continue your search.
Sources and Further Reading
- Google Calendar Help: Use Google Calendar in different time zones
- Microsoft Support: Set the time zone for a meeting or appointment in Outlook for Mac
- National Institute of Standards and Technology: Daylight Saving Time Rules
- GOV.UK: When do the clocks change?
- HireVue Candidate Help: Scheduling Your Interview


